Sanitary Butterfly Valve Hygienic Pneumatic Clamp Valves

A sanitary butterfly valve provides quarter-turn shutoff for hygienic liquid lines where clean flow paths and reliable sealing are required. The male-weld design uses SS304 or SS316L stainless steel for the body and disc, with EPDM, silicone, or NBR sealing options. A plastic multi-position handle provides manual operation, while the fixed weld connection suits permanent hygienic piping layouts.

Disc Movement and Seal Compression

A sanitary butterfly valve rotates a disc through approximately 90 degrees to open or close the flow passage. The open disc creates limited obstruction, while disc alignment, seat compression, stem condition, and internal surface finish influence sealing performance and operating torque.

Hygienic butterfly valves are suitable for systems requiring compact shutoff with a smooth stainless-steel flow path. Polished construction supports routine cleaning, while seal selection should match the process medium and cleaning conditions.

What Is a Sanitary Butterfly Valve?

A sanitary butterfly valve is a stainless-steel quarter-turn valve designed for hygienic fluid handling. Its disc rotates around a stem to control flow, while the seat seals around the disc in the closed position. Welded, clamp, and other connection configurations can be selected according to piping layout and maintenance requirements.

Male-Weld Connection and Cleaning Considerations

The male-weld connection forms a fixed joint with the process tube, reducing detachable connection points in the line. This configuration can suit permanent installations where frequent valve removal is not required. Tube alignment and weld quality should be controlled during fabrication to prevent distortion that may affect disc movement or seal contact.

For CIP or SIP systems, wetted surfaces, elastomer compatibility, drainability, and cleaning temperature should be evaluated together. A clamp butterfly valve can provide easier removal when repeated maintenance access is required, while a welded joint can suit fixed process piping.

Manual Control and Pneumatic Operation

Manual operation suits lines where local quarter-turn control is sufficient. When automatic cycling is required, pneumatic sanitary valves can pair with an actuator and control system, provided the valve interface and installation space are compatible.

The specified range includes 0–10 bar and -20°C to 120°C, with standards including 3A, DIN, SMS, RJT, ISO, and IDF. Final selection should verify medium, pressure, temperature, sealing material, connection dimensions, and cleaning conditions before installation.

Product Description

Product Parameter