Blog

A sanitary ball valve should be selected according to the process medium, body material, seal, pressure, temperature, connection, cleaning method, and flow path. Size and operating method should then ...

A sanitary butterfly valve is used for hygienic isolation in food, dairy, beverage, pharmaceutical, cosmetic, and chemical piping. Selection should consider pipe size, material, seal, connection, oper ...

The 13MHHM-Q single-pin squeeze clamp uses 304SS or 316L stainless steel for hygienic pipe connections. It covers 1/2"–12" or DN10–DN300 and has a listed surface finish of Ra≤0.8 μm. The design suits ...

A spray ball should be selected from tank size, spray coverage, cleaning pressure, connection, material, and cleaning method. Rotary and fixed designs serve different duties. After installation, nozzl ...

A sanitary butterfly valve does not achieve precise flow control through disc size alone. Accuracy depends on valve sizing, disc position, differential pressure, flow rate, and actuator response. A co ...

An angle seat valve is designed for fast switching, compact installation, and reliable shutoff. Its main features include a 90-degree flow path, pneumatic piston actuator, stainless-steel construction ...

  An angle seat valve works through pneumatic piston movement. Compressed air moves the piston and stem, which lifts or closes the plug against the seat. The 90-degree body directs flow through t ...

  An angle seat valve controls flow through pneumatic piston movement, stem travel, and plug-to-seat sealing. Compressed air moves the piston, while spring force or air pressure sets the valve po ...

An angle seat valve uses a pneumatic piston, stem, plug, and seat to control process flow. Its 90-degree body provides a compact layout, while NC, NO, and double-acting versions suit different operati ...

  An angle seat valve regulates steam temperature through flow control. A temperature sensor measures the process, a controller compares the value with its setpoint, and the actuator adjusts valv ...

A sanitary ball valve is selected according to the process medium, body material, seal, pressure, temperature, connection, and flow path. SS304 and SS316L are common body materials, while two-way and ...

A sanitary check valve should be installed with the correct flow direction, clean sealing surfaces, compatible gaskets, and proper pipeline alignment. Before installation, the line should be depressur ...