Electric Clamp End Sanitary Butterfly Valve
- Model:
- JOV-BFHE-22
- Place of Origin:
- Wenzhou China
- Packing:
- Suitable Packing For Sea/Air Transport
- Quantity:
- 10000 PCS Per Year
- Payment:
- T/T, L/C, Paypal, Alipay
- Medium:
- Water, Oil
- Material:
- SS304/SS316L
- Connection:
- Clamped
- Specification:
- DN25-DN250, 1"-10"
- Pressure:
- 0-10Bar
- Temperature:
- -20°~120°
- Gasket:
- EPDM/SILICON/NBR
- Type:
- Electric
A sanitary butterfly valve manages liquid rates across processing loops through an electropolished disc driven inside an elastomer liner, utilizing a compact electric motor to regulate fluid orifices without relying on external pneumatic piping. Flanged ferrules compress elastomeric seals uniformly under circumferential clamp rings, creating smooth internal boundaries that permit rapid decoupling during scheduled inspection routines while sustaining leak-free process isolation.
Modulating Servo Dynamics Regulating Batch Proportions
Continuous blending skids require fine incremental travel rather than simple fully open or fully closed states. Deploying hygienic butterfly valves driven through solid-state circuit cards allows plant networks to modulate fluid restrictions using standard 4-20mA control signals.
Internal planetary reduction gears maintain exact stem positions against process pressure fluctuations, preventing rotational drift while drawing minimal electrical current during stationary holding intervals.
Process Line Quarter-Turn Isolation Drive Performance
| Actuation Technology Framework | Fluid Throttling Resolution | Pneumatic Supply Prerequisite | Rapid Strip-Down Duration | Overload Defense Structure |
|---|---|---|---|---|
| Electric Modulating Gearmotor | Continuous Micro-Step Positioning | Completely Independent | Under Five Minutes | Electronic Current Limiter |
| Single-Chamber Spring Piston | Coarse Throttle Positioning | Continuous Dry Compressed Air | Under Five Minutes | Mechanical Spring Cushion |
| Double-Acting Air Cylinder | Binary Open-Closed Only | Continuous Dry Compressed Air | Under Five Minutes | Air Chamber Restriction |
| Multi-Notch Manual Quadrant | Discontinuous Four-Step Detent | Manual Labor Dependent | Toolless Instant Separation | Direct Operator Sensing |
Clamped Ferrules Accelerating Sanitation Protocols
Rigid piping headers complicate maintenance when technicians must service internal rubber components. Incorporating a butterfly valve clamp end allows single operators to swing hinged clamps open within seconds, separating valve housings from adjacent sanitary tubing without unthreading structural hardware.
Dual ferrule alignments preserve geometric centerlines, eliminating gasket pinch zones that cause premature elastomer failure during high-temperature thermal cycling routines.
Moisture-Sealed Enclosures Protecting Process Electronics
Frequent washdown procedures present severe environmental moisture risks across fluid blending suites. Enclosing motor circuitry inside IP67-rated cast housings equipped with internal space heaters prevents ambient humidity from condensing across electronic components when cold fluid lines run beside hot sanitation steam.
This stainless butterfly valve sanitary construction uses chemically passivated AISI 316L metallurgy buffed beneath Ra 0.4 micrometers, repelling biofilm accumulation across extended beverage manufacturing campaigns.
Product Description
| Product Name: | Sanitary Clamp/Thread/Weld Butterfly Valve With Pull Handle |
| Valve Body Material: | 1.4404/1.4301, SS304/SS316L |
| Seal Material: | EPDM (standard) FPM/SILICON/NBR, FDA177.2600 |
| Mex working pressure: | 10Bar |
| Max. Working Temperature: | 120 degree C |
| Availably size: | DN25-DN250, 1"-10" |
| Availably connection: | Clamp/Thread/Weld |
| Availably standard: | 3A/DIN/SMS/RJT/ISO/IDF |
| Operated: | Electric |
| Certificate: | ISO, PED/97/23/EC, FDA.177.2600 |
| Motor power: | 110/220V AC single-phase, 380/440 3-phase, 50/60hz |
Product Parameter
Product Pictures
