Sanitary Spherical Ball Valve Clamp
- Model:
- BVMHC-22-1
- Place of Origin:
- Wenzhou, China
- Packing:
- Suitable Packing for Sea/Air Transport
- Quantity:
- 100000 PCS Per Year
- Payment:
- T/T, L/C, Western Union
- Medium:
- Water, Oil
- Material:
- SS304/SS316L
- Connection:
- Clamped
- Specification:
- 1/2"-4"
- Pressure:
- 0-10Bar
- Temperature:
- -20°~120°
- Gasket:
- PTFE
A sanitary ball valve with a non-retention design controls fluid flow in hygienic processing lines while reducing areas where liquid may collect inside the valve. This stainless steel clamped model uses a PTFE seal and is listed in SS304 or SS316L, with sizes from 1/2 to 4 inches. Proper selection depends on connection dimensions, fluid compatibility, pressure, temperature, and the required cleaning procedure.
How the Non Retention Structure Affects Cleaning
In a hygienic line, fluid trapped around the ball or seat can complicate product changeovers and cleaning. A non-retention design aims to reduce these hold-up areas, but actual performance depends on the internal geometry, seal arrangement, and installed orientation. A sanitary valve should therefore be assessed using its sectional drawing and confirmed cleaning requirements rather than its product name alone.
The PTFE seat provides a sealing interface between the ball and valve body. Its suitability depends on the fluid composition and operating temperature. Compatibility should be verified for cleaning chemicals and process media, especially when the line handles different formulations or undergoes repeated cleaning cycles.
Specification Checks Before Installation
| Inspection Point | Listed Configuration | What to Verify |
|---|---|---|
| Body material | SS304 or SS316L | Corrosion and media compatibility |
| Size range | 1/2–4 inches | Mating pipe dimensions |
| Working pressure | Up to 10 bar | Actual line pressure |
| Temperature | −20°C to 120°C | Process and cleaning temperatures |
| Seal | PTFE | Chemical and thermal suitability |
Clamp Connection and Joint Inspection
A ball valve clamp connection allows the valve to be removed without cutting the connected pipework. Correct assembly still depends on matching ferrule dimensions, selecting a compatible gasket, and applying the specified clamping procedure. Before installation, inspect the sealing faces for scratches or deformation and confirm that the joint sits evenly.
When comparing a sanitary spherical valve with other hygienic valve designs, the internal flow path, shutoff requirements, maintenance access, and cleaning method all matter. A compact valve with a suitable connection can simplify line service, but it should not be assumed to provide full CIP or SIP performance without supporting documentation.
Confirm the Operating Limits
The listed pressure and temperature values should be checked against the complete assembly, including the seat, gasket, and connected piping. Confirm the exact connection configuration before ordering, since available connection options may differ from the clamped model shown.
Product Description
| Size: | 1/2"-4", DN10-DN100 |
| Temperature: | -20ºC-120ºC |
| Pressure: | 10 Bar |
| Material: | AISI304, AISI316L |
| Gaskets: | PTFE FDA 177. 1550 |
| Connection: | Clamp, Weld, Male, Flange, Standard With 3A, SMS, DIN, RJT, IDF. |
| Advantage: | Smaller And Lighter Than Other Type Ball Valve, Operating Torque Is Small, It Can Be Installed With Pneumatic Actuators And Electric Actuators. |
Product Parameter
