What Are The Precautions For Installing And Disassembling Sanitary Ball Valves?
Sanitary Ball Valve is composed of two flanges, a valve body and two PTFE valve seats. It is installed with bolts. A valve seat cleaning joint can be added to clean the ball valve cavity and discharge it from the drain hole. So do you know what are the precautions for installing sanitary valve?
The precautions for installing tri clamp ball valve are as follows:
1. Before installing the sanitary 3 way valve, make sure that the sanitary 3 way ball valve meets the design requirements and relevant standards.
2. When transporting and installing the 1.5 tri clamp ball valve, be careful to prevent accidents of bumps and scratches
3. Before installing the 3 way tri clamp valve, remove impurities such as iron filings to prevent foreign matter from being mixed in the sealing seat of the 2 sanitary ball valve. In addition, the hygienic ball valve should be closed during installation.
4. When lifting the valve. The tri clamp 3 way valve should be lifted correctly at the designated lifting position so that the 2 tri clamp ball valve can be lifted or pulled only under local force.
5. When installing the tri clover ball valve, make sure whether the medium flow direction, installation form and handwheel position meet the regulations.
1 2 tri clamp ball valve are valve fittings used in places with high hygiene requirements. So do you know what tools and precautions are there for disassembling ball valve clamp?
Tools and precautions that should be used to disassemble clamp ball valve. When disassembling clamp on valve: pay attention to the valve seat, do not scratch it with hard objects, otherwise the seal will not be tight; and the ball valve should not be placed randomly, it is easy to lose. The tools for disassembling and assembling full bore sanitary ball valve include screwdriver wire cutters, adjustable wrenches and hammers.
hygienic stainless steel valves also have the following tools: locking wrench: locking wrench, divided into fixed hook wrench, movable hook wrench and U-shaped locking wrench; fixed wrench: wrench a nut of a specification, the wrench is not easy to damage the nut and bolt compared with the adjustable wrench; pneumatic sanitary ball valve socket wrench: composed of plum wrenches of different sizes, used for difficult-to-operate positions; sanitary ball handwheel wrench: can be welded with the following pipes and round steel, commonly used switch handwheel.