Advantages And Applications Of Iso Double-jaw Clamps

An ISO double claw clamp connects ISO-K vacuum flanges with a centering ring and O-ring to form a secure joint for industrial vacuum piping. Its claw design spreads tightening force around the flange, while stainless steel construction suits vacuum chambers, process lines, and modular systems that require reliable sealing and quick service access.

Why Double Claw Clamping Suits Vacuum Systems

Vacuum connections depend on flange alignment and even O-ring compression. The clamp grips the rear flange grooves and pulls the mating flanges together around the centering ring.

A kf clamp uses a similar sealing concept for smaller vacuum assemblies, but the flange family and dimensions must match the selected hardware.

What Even Clamping Achieves

A suitable clamp arrangement can provide:

• Uniform force around the flange joint
• Stable O-ring compression
• Repeatable installation and removal
• Consistent flange alignment
• Easier maintenance of modular vacuum piping

The centering ring keeps the O-ring in position, while the claw clamp maintains the mechanical load needed for sealing.

ISO Clamp Design and Material Options

An iso clamp is intended for ISO-K vacuum flange assemblies. SS304 stainless steel and aluminum are available materials, while CNC machining and a surface finish of Ra≤0.8 are listed for the configuration.

Seal material should match the vacuum level, temperature, process gas, and cleaning conditions. Flange profile and clamp dimensions must also correspond exactly.

ISO Clamp vs. KF Clamp

An iso clamp is generally used with ISO-K large vacuum flanges, while KF hardware serves compact vacuum connections. ISO-K systems commonly cover larger nominal sizes, while KF systems include sizes such as KF25 and KF40.

Where KF25 and KF40 Fit

A kf25 clamp matches KF25 flange dimensions, while a kf40 clamp matches KF40 flange dimensions. Both use a centering ring and O-ring within the quick-flange assembly.

This distinction matters when a vacuum system is expanded because similar pipe dimensions do not mean interchangeable flange connections.

Building a Reliable Vacuum Connection

A vacuum joint should be checked before the system reaches operating pressure. Flange faces, O-ring position, clamp engagement, and tightening condition all affect sealing performance.

Installation Checks

A practical installation sequence includes:

1. Inspect both flange faces and remove particles or surface damage.
2. Position the centering ring and O-ring correctly.
3. Place the double claw clamp evenly around the flange.
4. Tighten the fastener according to the specified torque.
5. Perform a suitable leak test before service.

Excessive tightening should be avoided because over-compression can damage the seal or affect flange geometry.

Where Double Claw Clamps Are Used

ISO double claw systems suit vacuum chambers and larger vacuum pipe assemblies where modular connections and service access are required.

Typical applications include:

• Industrial vacuum processing
• Vacuum coating equipment
• Chemical process vacuum lines
• Laboratory and research systems
• Large vacuum chamber connections

The modular format also allows elbows, tees, crosses, valves, and other vacuum components to form configurable piping assemblies.

Choosing the Right Vacuum Clamp

A reliable vacuum connection starts with flange compatibility. The flange standard, nominal size, seal material, vacuum level, temperature, and installation space should all be checked together.

For larger ISO-K connections, the double claw design provides a practical mechanical joint. For compact KF25 or KF40 sections, the matching KF hardware should be selected. Correct flange and clamp matching keeps the vacuum system consistent and serviceable.

ISO Double Claw Clamp

• These single and double clamps are used (in conjunction with a centering ring with fitted o-ring) for mating ISO flanges. The ISO flange (also called Large ISO) is used for HV chamber ports and is available in two distinct styles; ISO-K which uses clamp fasteners and ISO-F which uses nut and bolt fasteners.

Product Description

Product Parameter